No
Parts
6) Disassemble the bolts that are assembled
7) Press the Steel Hangers at both sides of the
2
Control-Box
1) Disconnect the Connector Wire that is
2) Unscrew the 2 fixed screws on both sides of
Samsung Electronics
Procedure
with the indoor unit at the 4 panel corners.
panel inwards, and rotate them 90 degrees
to remove it from the indoor unit's Hock.
Remove the panel from the indoor unit.
connected to the indoor unit's PBA from
the PBA.
the Control Box, and disassemble the Control
Box from the indoor unit. (Use +Screw Driver)
Disassembly and Reassembly
Remark
3-15