Disassembly and Reassembly
No
Parts
5
Stepping Motor
1) Loosen the 4 screws in rear side of Front
2) Loosen the 2 screws as shown in picture.
3) Disassemble the Blade and Stepping Motor
6
Display PCB
1) Loosen the 3 screws in rear side of
2) Disassemble Display PCB assembly and
3) Disassemble the Display PCB.
3-64
Procedure
Cover assembly as shown in picture.
assembly and remove the 2 Screws Stepping
Motor.
Front Cover assembly as shown in picture.
Disconnect Wire.
Remark
Samsung Electronics