Table of Contents
Advertisement
4.4
Routing
This section allows the user to setup Static or Dynamic Routing.
4.4.1 Static
Network Address: Enter the target's IP Address in the textbox.
Network Mask: Enter the Subnet Mask in the textbox.
Gateway Address: Enter the Gateway IP Address in the textbox.
Interface: Select "LAN" or "WAN" from drop-down list.
Metric: Enter the number of 'hops' in the textbox. Normally you can set the value to '0'.
Click the "Add" button to save the settings.
30
www.encore-usa.com
Advertisement
Table of Contents
