Lincoln Electric LN-25X Operator's Manual page 19

LN-25X™
OPERATION
True Voltage Technology (TVT)
When the TVT LED is illuminated, the CrossLinc™ enabled power
source is compensating for the voltage dropped across the
electrode in between the power source and LN-25X™.
CrossLinc™ LED
The CrossLinc™ LED displays whether the feeder is connected to
the power source. When the feeder has successfully connected to
the power source, the LED will illuminate.
Wire Feed Speed LED and Amperage LED
The Wire Feed Speed and Amperage LEDs will communicate what
is being displayed on the Wire Feed Speed Digital Display. When
the Wire Feed Speed LED is illuminated, wire feed speed is being
displayed. When the Amperage LED is illuminated, amperage is
being displayed.
Voltage LED
The Voltage LED will be illuminated when the Voltage Digital
Display is displaying actual voltage or when its displaying with a
CrossLinc™ connection.
Five Pin Gun Trigger Connector
The 5 Pin Gun Trigger Connector is where the trigger that is
attached to the welding gun is connected. This will actuate the
welding current when the trigger is pulled.
Work Sense Lead
The Work Sense Lead is used to power the feeder and
communicate with the power source. Connecting the Work Sense
Lead is critical for the operation of the feeder, as it will not power
up if it is disconnected.
B-3