Toshiba BU505MCG Instruction Manual page 75

● Registers
Register
UserSetSelector
UserSetLoad
UserSetSave
UserSetDefault
● Setting
- Select a channel of a user setting
Set the following value to "UserSetSelector" register. The setting value is Enumeration type.
Select the channel of user setting for "UserSetLoad" and "UserSetSave".
setting value
Default
UserSet1 (*)
UserSet2~15
- Load/Save a user setting
When execute "UserSetLoad", the camera loads user setting from the channel selected in
"UserSetSelector" register and applies them.
When execute "UserSetSave", the camera saves user setting to the channel selected in
"UserSetSelector" register.
Copyright © 2016 TOSHIBA TELI CORPORATION, All rights reserved.
Visibility Access
Beginner R/W Selects a channel of user setting.
Beginner W Executes load a user setting.
Beginner W Executes to save a user setting.
Beginner R/W Selects a channel of user setting when camera powers up.
- White balance unadjusted.
- DPC feature is not set.
- Other features similar to the initial factory setting.
Memory channel 1 for user setting.
Following features are adjusted.
- White balance
- DPC feature ON in the defective pixel coordinates already set.
Select memory channel 2 to 15 for user setting.
Description
Description
74 / 92
Save Load
○
-
○ ○
○ ○
* initial factory setting
D4253386C
http://www.toshiba-teli.co.jp/en/