Table of Contents
Advertisement
● e-CON* Connector adoption
The e-CON connector adoption enables to assemble the cable easily without using special tools.
● Random Trigger Shutter
The Random Trigger Shutter function provides images in any timing by input of an external trigger signal.
Trigger control from PC is available as well.
● Scalable
Selectable video output area. This mode achieves higher frame rate by reducing vertical output area. And
reduces occupied data rate of USB bus by reducing horizontal output area.
● Binning
B/W models hove binning. In this mode, pixel data is combined by vertical and horizontal. Vertical binning
achieves high frame rate.
● Decimation
Camera reads all effective areas at high speed by skipping lines.
● Color processing
Color models have built in color processing. There are RGB, BGR, YUV 4:2:2, YUV 4:1:1, Bayer and Mono
output modes. In addition, it produced an image with restrained false color by adaptive filter interpolating 7 x 7
pixels.
● IR-cut filter
Build-in IR-cut filter models are optional for color models.
Suffix [F] is attached to the model name of built-in IR-cut filter model. (e.g. BU302MCF)
* Suffix [F] is not shown in the common part of specifications.
● Compact and lightweight
This camera is compact and lightweight; it is easy to integrate into industrial equipment.
● EU RoHS & Chinese ROHS
* USB is a unified standard established by USB-IF(USB Implementers Forum).
* USB3 Vision is a unified standard established by AIA (Automated Imaging Association).
* GeniCam is a registered trademark of EMVA (European Machine Vision Association).
* IIDC2 is a unified standard established by JIIA (Japan Industrial Association).
* e-CON (Easy & Economy connector) is a sensor connector that is normalized by the manufacturer of the
sensor, FA equipment and connector.
Copyright © 2016 TOSHIBA TELI CORPORATION, All rights reserved.
13 / 92
D4253386C
http://www.toshiba-teli.co.jp/en/
Advertisement
Table of Contents
