Basic Function; Switching The System On; Switching The System To Standby Mode; Volume Control - JVC UX-G616W Instructions Manual

Basic function

Switching the system on

Press or SOURCE button.
STANDBY/TIMER indicator will go out.
The system will switch to the last selected source.

Switching the system to standby mode

Press button.
STANDBY/TIMER indicator is lit.

Volume control

For Remote control unit:
Press VOLUME + button to increase, or press
VOLUME – to decrease the volume level.
For Main unit:
Turn VOLUME knob right to increase, or turn
VOLUME knob left to decrease the volume level.
"VOL XX" is displayed. Adjust in the range from MIN
(0) to MAX (31).
To switch off the volume temporarily
Press FADE MUTING button.
Playback continues without sound, and "MUTING"
is flashing.
⁄
• To restore the volume, press FADE MUTING button again or
adjust the volume.
12
UX-G616

Adjusting the sound

You can reinforce or weaken the bass and treble
levels suitable for your favorite music.
To adjust the bass and treble levels
For Remote control unit:
Press BASS/TREBLE button repeatedly to select
BASS or TREBLE. Press VOLUME + or – button to
adjust the enhancement level: –8 to +8.
For Main unit:
Turn BASS or TREBLE knob to adjust the
enhancement level: –8 to +8.