M.2 Solid-State Drive - Lenovo Legion Creator Tower 7i User Manual

M.2 solid-state drive

Prerequisite
Before you start, read Appendix A "Important safety information" on page 57and print the following
instructions.
Attention: The internal storage drive is sensitive. Inappropriate handling might cause damage and
permanent loss of data. When handling the internal storage drive, observe the following guidelines:
• Replace the internal storage drive only for upgrade or repair. The internal storage drive is not designed for
frequent changes or replacement.
• Before replacing the internal storage drive, make a backup copy of all the data that you want to keep.
• Do not touch the contact edge of the internal storage drive. Otherwise, the internal storage drive might get
damaged.
Replacement procedure
1. Turn off the computer and remove all connected devices and cables.
2. Remove the power cord. See "Power cord" on page 24.
3. Remove the right computer cover. See "Right computer cover" on page 27.
4. Remove the front bezel. See "Front bezel" on page 29.
5. Remove the screws to remove thermal pad from the M.2 solid-state drive.
6. Remove the screw from M.2 solid-state drive.
.
Chapter 5 CRU replacement
37