Nokia RM-407 User Manual page 123

WEP encryption — Select the desired WEP
encryption key length.
WEP key format — Select whether you want to
enter the WEP key data in ASCII or Hexadecimal
format.
WEP key — Enter the WEP key data.
802.1x security settings
Select 802.1x as the WLAN security mode.
802.1x authenticates and authorises devices to access
a wireless network, and prevents access if the
authorisation process fails.
Select WLAN security settings and from the following:
WPA/WPA2 — Select EAP (Extensible
Authentication Protocol) or Pre-shared key
secret key used for device identification).
EAP plug-in settings — If you selected WPA/
WPA2 EAP, select which EAP plug-ins defined in
your device to use with the access point.
Pre-shared key — If you selected WPA/WPA2
Pre-shared key, enter the shared private key that
identifies your device to the WLAN to which you
connect.
WPA security settings
Select WPA/WPA2 as the WLAN security mode.
Select WLAN security settings and from the following:
WPA/WPA2 — Select EAP (Extensible
Authentication Protocol) or Pre-shared key
secret key used for device identification).
Cyan Cyan Cyan Cyan Magenta Magenta Magenta Magenta
EAP plug-in settings — If you select
EAP, select which EAP plug-ins defined in your
device to use with the access point.
Pre-shared key — If you select
shared key, enter the shared private key that
identifies your device to the WLAN to which you
connect.
WPA2 only mode — To allow both TKIP and AES
(Advanced Encryption Standard) encryption, select
Off. To allow AES only, select On
Wireless LAN plugins
Select Menu Tools Settings
Access points.
The EAP (extensible authentication protocol) plug-ins
(a
are used in wireless networks to authenticate wireless
devices and authentication servers, and the different
EAP plug-ins make possible the use of various EAP
methods (network service).
You can view the EAP plug-ins currently installed in
your device (network service).
EAP plug-ins
1. To define the EAP plug-in settings, select
New access point and define an access point that
uses WLAN as a data bearer.
2. Select 802.1x or WPA/WPA2 as the security mode.
3. Select WLAN security settings
EAP EAP plug-in settings.
(a
Yellow Yellow Yellow Yellow Black Black Black Black
WPA/WPA2
WPA/WPA2 Pre-
Connection
Options
WPA/WPA2
123