Charge The Battery - VTech DS662V-1F User Manual

Charge the battery

Place the handset in the telephone base
or the charger to charge.
CHARGE light
remains on when
charging.
Once you have installed the battery,
the handset LCD display indicates the
battery status (see the table below).
NOTES
• For best performance, keep the handset in
the telephone base or charger when not
in use.
• The battery is fully charged after 12 hours
of continuous charging.
If you place the handset in the telephone
•
base or the charger without plugging
in the battery, the screen displays
No battery.
Battery Battery
indicators status
The screen The battery
is blank, or has no
shows Put charge or
very little
in charger
and charge. The
flashes. handset
cannot be
used.
The screen The battery
shows Low has enough
battery and charge to be
flashes. used for a
short time.
The screen The battery
shows is charged.
HANDSET
X.
When it is fully charged, you can expect
the following performance:
* Operating times vary depending on your actual
** Handset is not charging or in use.
Action
Charge
without
interruption
(at least
30 minutes).
Charge
without
interruption
(at least
30 minutes).
To keep
the battery
charged,
place it in the
telephone
base or
charger when
not in use.
8
Operation
While in handset
use (talking*)
While in
speakerphone
mode (talking*)
While not in use
(standby**)
use and the age of the battery.
Operating time
Seven hours
Three hours
Five days