Installing And Removing The Battery - Canon EOS 350D Instruction Manual

Installing and Removing the Battery

Installing the Battery
Load a fully-charged Battery Pack NB-2LH into the camera.
Checking the Battery Level
When the power switch is set to <1> (p.28), the battery level will be
indicated in one of three levels:
22
1 Open the battery compartment
cover.
¡
Slide the lever as shown by the arrow
and open the cover.
2
Insert the battery.
¡
Point the battery contacts downward.
¡
Insert the battery until it locks into
place.
3
Close the cover.
¡
Press the cover until it snaps shut.
z : Battery level OK.
x : Battery level is low.
n
: Battery must be recharged.