Setting The Count Down Timer - Cobra 29 LX MAX User Manual

Operation
nued
Note
Default snooze time length
2 3
1.5
NB/ANL CAL
SWR
TX
ANL
is 10 minutes.
RX
S/RF
RF
Note
SWR
CAL Use DIM/ESC button to exit
3 5 7 9
1
SIG +30dB
from any menu back to CB
standby mode.
VOL SQ DYNAMIKE
Note
Default alarm length
is 60 seconds and is set in
10 second increments.
F MIN MAX
Note
Once count down time
is complete, there will be
2 3
1.5
NB/ANL audio tones for 5 seconds.
SWR CAL
TX
ANL
RX
S/RF
RF
SWR
CAL
3 5 7 9
1
SIG +30dB
OL SQ DYNAMIKE
MIN MAX
NB /ANL
2 3
1.5
NB/ANL CAL
SWR
ANL
S/RF
S/RF
RF
SWR
CAL
3 5 7 9
1
SIG +30dB
SWR /CAL
VOL SQ DYNAMIKE
MAX
OFF MIN
AW-1210039-1B_29LX_MAX_MANL_REV_022021.indd 18-19 AW-1210039-1B_29LX_MAX_MANL_REV_022021.indd 18-19
Setting the Alarm
continued
Once the alarm settings are complete, rotate the Menu/Enter
knob clockwise to Set Snooze and press Menu/Enter to select.
EXIT
SET SNOOZE
ALARM LENGTH
MEM WX !
Select the desired snooze time (from 1 to 60 minutes). Press
Enter to save and exit, return to Set Snooze or Alarm
RF GAIN DELTA TUNE
Length. Select Alarm Length to set the alarm duration
(from 10 to 300 seconds). Press the Menu/Enter knob save
and exit.
MIN MAX

Setting the Count Down Timer

To set the count down timer, press Menu/Enter knob and
select Set Count Down.
SET CLOCK
MEM SCAN
ALARM CLOCK
SET COUNT DOWN
MEM WX !
Follow the instructions in Setting the Clock section (page
RF GAIN DELTA TUNE
17) to set the count down hour and minutes. Once the
desired count down time is selected, press the Menu/Enter
NB /ANL
knob again to save and exit.
NB/ANL
S/ RF
MIN
MAX
Key Tones Mode On and Off
SWR /CAL
Press the Menu/Enter knob and select Key Tones.
VOL
Press the Menu/Enter to set Key Tones On/Off.
SET KEY TONES
TX
OFF
RX ON
OFF
MEM WX !
NB /ANL
Rotate the Menu/Enter knob to select On/Off and press
NB/ANL
RF GAIN DELTA TUNE
the Menu/Enter knob to exit to main menu.
S/RF
S/RF
SWR
SWR /CAL
18
MIN MAX VOL
OFF
Radio Check Mode
Allows testing of important radio functions. Press Menu/
Enter knob and select RADIO CHECK.
Press Menu/Enter to select 1st test, 2nd test and 3rd test.
CH 9/
SCAN
19
Test 1- Battery Level: Confirms that battery voltage level is
MEM SCAN
between 10.8 V to 15.8 V. If in that range, it is PASS. Outside
of that range, either FAIL LOW or FAIL HIGH will be
displayed. Press Menu/Enter knob to advance to next test.
ESC
1
SWR
T BACK
CAL
2
OFF
Test 2- RF Power Output: Confirms a 3.3 to 4 Watt output
CH 9/
SCAN
19
level. Once the PTT button is pressed, Pass or Fail will be
displayed if the level is outside the limits.
1
ESC
SWR
T BACK
CAL
NB/ANL
2
1.5 2 3 RF POWER OUTPUT 1.5 2
CAL NB/ANL
SWR SWR
TX
ANL ANL
RX PASS
S/ RF
S/RF S/RF
RF RF
SWR OFF SWR
CAL CAL
3 5 7 9 3
1 1
SIG +30dB SIG
SWR /CAL MEM
Test 3- Antenna Mismatch Warning: Press the
SQ DYNAMIKE VOL SQ DYNAMIKE
PTT button to check for proper matching.
CH 9/ 1
SCAN
19
MIN OFF MIN MIN
MEM SCAN
ESC
NB /ANL
2
2 3 2
1.5 NB/ANL ANTENNA 1.5
SWR CAL SWR
TX
SWR
ANL T BACK ANL
CAL
PASS
RX
S/RF
S/RF
RF RF
SWR
CAL CAL
3 5 7 9 3
1 1
SIG +30dB SIG
SWR /CAL
MEM WX !
SQ OFF DYNAMIKE VOL SQ DYNAMIKE
MIN OFF MIN MIN
3
CH 9/
3
3
SCAN RF POWER OUTPUT
CAL
TX 19
RX MEM SCAN FAIL
5 7 9 ESC
+30dB
WX ! MEM WX !
SWR
RF GAIN DELTA TUNE T BACK RF GAIN DELTA TUNE
CAL
PRESS PTT
MIN MAX
MAX OFF
TO CHECK
ANTENNA
CH 9/
3
3 SCAN ANTENNA
CAL
19
TX
RX MEM SCAN FAIL
5 7 9 ESC
+30dB
MEM WX !
SWR
RF GAIN DELTA TUNE T BACK RF GAIN DELTA TUNE
CAL
MAX OFF MIN MAX
Operation
Note
Use DIM/ESC button to exit
and return to CB standby
mode. If 10 seconds pass or if
Enter button pressed, unit goes
to 2nd test.
Note
Press PTT within 10 seconds or
unit will go to the next test.
Note
Use DIM/ESC button to exit and
return to CB standby mode. If 10
seconds pass or if Enter
button pressed, go to 3rd test.
CH 9/
SCAN
19
MEM SCAN
Note
ESC
If 10 seconds pass or if
Menu/Enter knob is pressed,
SWR
T BACK
CAL
testing is complete. Unit will
return to CB Standby mode.
OFF
CH 9/
SCAN
19
MEM SCAN
ESC
19 SWR
T BACK
CAL
2/24/21 2:55 PM 2/24/21 2:55 PM
OFF