Canon 2502C016 User Manual page 61

Convenient Projection Features
■ Switching Input Signals
If or is displayed in the center of the image area, you can switch control rights
to the other side by using the [ ] / [ ] buttons on the remote control.
Remote control
Press the INPUT button, and then select the input signal for the side with control
rights.
To determine which side is currently under your control, check the image ID in
orange in the upper right of the menu.
The side without control rights is labeled with a white circle.
Side currently under control
(input signal can be switched)
• Display of the centered number fades in a while, but you can view it again by pressing
the SPLIT button on the remote control.
• To exit split-screen display, press the EXIT button on the remote control.
• You can also switch to split-screen display by selecting [Split screen] in the [Input
settings] menu (P136).
• Some functions cannot be adjusted, such as [Sharpness] (P141), [Dynamic gamma]
(P144), and [Motion blur reduction] (P172).
• Some functions are not available, such as [Image flip H/V] (P150), [Screen aspect]
(P151), [Keystone] (P152) and [Logo capture] (P162).
• For split-screen image adjustment, use the [Image priority] setting (P148).
• Image mode colors differ somewhat from those in single-image mode.
Current input signal
(with control rights)
Current input signal
(without control rights)
61