Menu Description
Extron XTP
> [System settings] >
Specify whether to connect to Extron XTP transmitters when connected via
HDBaseT.
Submenu
Off
On
Serial communication
> [System settings] >
Select ports used for serial communication. Otherwise, you can refer to this setting
to check setting values for the port selected for serial communication.
Submenu
Service port
HDBaseT
Detail
Power supply settings
> [System settings] >
Specify how power is managed at startup, in standby, and when no signal is
supplied.
[Extron XTP]
Do not connect to XTP devices.
Connect to XTP devices.
[Serial communication]
Use the service port (CONTROL).
Use the HDBaseT port.
Option
Baud rate
Modulation rate, in bits per second.
Data bits
Number of bits of data.
Parity
Number of parity bits.
Length of mark representing the end of data
Stop bit
bits. Select 1 or 2.
[Power supply settings]
170
Function
Function
Function