Canon 2502C016 User Manual page 208

Projector Web Screen Menu
• If settings related to TCP/IP were changed, it is necessary to disconnect and reconnect
to the network. If the network subnet mask was changed, select [Subnet mask] in the
above screen and set the new subnet mask.
• IPv6 connectivity is not available in PJ AP mode (P84). [IPv6 address] is grayed out.
• For partial SSID editing when connected in PJ AP wireless LAN mode (P84), you can
edit the portion between PJ- and _Canon0D. Enter 1-byte alphanumeric characters,
including hyphens and underscores (1 – 15 characters).
Specifying Networked Multi-Projection Settings [NMPJ Password]
From [NMPJ Password] in the settings screen, you can specify the items needed
for NMPJ authentication. For the setting procedure, see "Network Setting" (P91).
Item
Password
Confirm password
For details on Networked Multi-Projection (NMPJ), refer to the NMPJ user's manual.
User's manual download site: http://www.canon.com/iprj/
Explanation
Enter the password required for a
networked multi-projection connection
in 1-byte alphanumeric characters (0 –
15 characters).
For confirmation, enter the same
password as you entered in [Password].
208
Factory default setting
<Blank>
<Blank>