Philips AVENT SCD292 Manual page 19

4213_354_3951_4_DFU-Luxury_schalen naar 140x200_v7.indd 19
9 When you have finished expressing, turn off the breast pump and
carefully remove the pump body from your breast.
10 Unscrew the bottle from the pump body. You have multiple options:
-
Place a cleaned sealing disc in a cleaned screw ring, and screw the
assembled screw ring onto the bottle. The expressed milk in the bottle
is ready for storage.
-
Alternatively, place a cleaned nipple in a cleaned screw ring and
screw the assembled screw ring onto the bottle. Seal the nipple with
the dome cap.
11 Unplug the adapter from the wall outlet to disconnect the appliance
from the electrical power. Unplug the motor unit from the adapter.
Unplug the silicone tube and cap from the silicone diaphragm. For easy
storage, wrap the silicone tube around the motor unit and clip the cap
onto the tube.
12 Clean the other used parts of the breast pump according to the
instructions in section 'Cleaning'.
English
19
26/07/2018 15:20