Table of Contents
Advertisement
Speakers
Description
Speakers
Before removing the speakers, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on,
and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then
unplugging the AC adapter from the computer.
4. Remove the battery (see
5. Remove the following components:
a. Optical drive (see
b. Hard drive (see
c. Keyboard (see
d. Keyboard cover (see
e. Power button board (see
f. Display assembly (see
Remove the speakers:
1. Disconnect the speaker cable from the system board 1.
2. Disconnect the LED cable from the right speaker 2.
3. Remove one screw from each speaker. A Phillips PM2.0x6.0 screw is on the left 3, and a Phillips PM2.0x4.0
screw is on the right 4.
4. Remove the speakers 5.
Reverse this procedure to install the speakers.
Removal and replacement procedures
"Battery" on page
"Optical drive" on page
"Hard drive" on page
4-10)
"Keyboard" on page
4-17)
"Keyboard cover" on page
"Power button board" on page
"Display assembly" on page
4-7).
4-8)
4-20)
4-22)
4-23)
Spare Part Number
496829-001
4–36
Advertisement
Table of Contents
