Table of Contents
Advertisement
5. Unscrew and remove the burner rings
using the key provided.
When reinstalling the hob,
remember that the rings should be
tightened as far as possible, using
the key provided.
If the rings are not tightened
completely, the flame interruption
zones on the crowns will not be
aligned with the spokes of the pan
supports.
58
Installation
6. Remove the hob.
7. Remove the hob support plate.
The support plate must be
reinstalled with the front support
lugs (A) facing towards the gas
valves, taking care to put it back in
the same position as it was before
it was removed.
Advertisement
Table of Contents
