Installation; Safety Instructions; Section Cut From The Countertop - Smeg Piano P705ES Instructions Manual

5 Installation

5.1 Safety instructions

Heat production during appliance
operation
Risk of fire
• Check that the carcase material is heat
resistant.
• Check that the carcase has the required
openings.
Veneers, adhesives or plastic coatings on
adjacent furniture should be temperature-
resistant (>90°C), otherwise they might
warp over time.
The minimum clearance between a
ventilation hood and the cooking
surface must be at least the
distance indicated in the ventilation
hood installation instructions.
The minimum clearances must also be
respected for the edges of the hob on the
back as indicated in the mounting
illustrations.
If a hood is installed above the
hob, refer to the hood instructions
manual to ensure that the correct
clearance is left.
50
Installation

5.2 Section cut from the countertop

Create an opening with the dimensions
shown in the figure in the countertop of the
piece of furniture.
L (cm)
60
72
100
A (mm)
min 220 min 460 min 750 20 - 40
A (mm)
min 280 min 460 min 750 20 - 40
The following operation requires
building and/or carpentry work
and must therefore be carried out
by a competent tradesman.
Installation can be carried out on
various materials such as masonry,
metal, solid wood or plastic
laminated wood as long as they
are heat resistant (>90°C).
X (mm)
555 - 560
555 - 560
839 - 844
L = 60 cm
B (mm) C (mm)* D (mm)
L = 72 cm - L = 100 cm
B (mm) C (mm)* D (mm)
Y (mm)
478 - 482
478 - 482
480 - 484
E (mm)
min 50
E (mm)
min 50