Toshiba Satellite L635 Series User Manual page 147

The optical disc drive will be used to start the computer when there is a
* 2
bootable disk contained in the drive.
To change the boot drive, follow the steps below.
1. Hold down F12 and boot the computer. When the
2. Use the up and down cursor keys to select boot device you want and
■
If a Supervisor Password has been set, manual boot device selection
functions may be restricted.
■
The boot device selection methods described above will not change
the boot priority settings that have been configured in HW Setup. In
addition, if you press a key other than one of those listed, or if the
selected device is not installed, the system will continue to boot
according to the current and available settings in HW Setup.
Keyboard
Wake-up on Keyboard
When this feature is enabled and the computer is in Sleep Mode, you can
turn on the computer by pressing any key. However, please be aware that
this option will only work with the internal keyboard and only when the
computer is in Sleep Mode.
Enabled
Disabled
LAN
Wake-up on LAN
This feature lets the computer's power be turned on from shutdown when it
receives a wake-up packet ( Magic packet ) from the LAN.
Do not install or remove a memory module while Wake-up on LAN is
enabled.
■
The Wake-up on LAN function consumes power even when the system
is off. Leave the AC adaptor connected while using this feature.
■
Regarding Wake-up on LAN from sleep or hibernation, you must check
the "Allow the device to wake the computer" check box within the LAN
Device properties. ( This feafure does not effect the Wake-up on LAN
from sleep or hibernation. )
User's Manual
ing Innovation>>>
press ENTER.
screen appears, release the F12 key.
Enables the Wake-up on Keyboard function.
Disables the Wake-up on Keyboard function.
(Default)
HW Setup and Passwords
TOSHIBA Lead-
7-4