Table of Contents
Advertisement
Using Combined Air Purifiers
Combining air purifiers
22
English
• When combined, the top product will operate
both units together. The bottom unit can only be
turned on or off, but operational control is ceded
to the top unit.
– In combined air purifiers, you can operate them
using only the top product. The bottom product
operates in the same way as the top product.
However, when the top product is operating,
you can turn just the bottom product on or off.
– The display lights up only on the top product,
and only the power status is visible on the
bottom product.
– You can rotate the air outlet of the product at
the top in 360 degrees.
• When combining and decombining products, be
sure to turn off their powers and use their handles.
• Some functions may not be supported if this product
is combined with a model released previously.
STEP 1 Open the module connector on the bottom
product.
• Push and rotate the module connector on the
product that will be located at the bottom.
STEP 2 Disconnect the power from the top product.
• Disconnect the power adapter from the product
that will be located at the top.
– In combined products, the power is supplied
through the bottom product.
Keep the disconnected power adapter in a
separate place.
STEP 3 Combine the top and bottom products.
• Align the product that will be located at the top with
the module connector on the top of the product that
will be located at the bottom, and assemble both
products.
Caution
• If the products are assembled without being aligned
with the module connector, it may cause product
falling, product damage, or personal injury.
Advertisement
Table of Contents
