Hide thumbs Also See for pursuit 719:

Advertisement

Model No. WLCCEX14000
Serial No.
Write the serial number in the
space above for reference.
If you are MISSING PARTS or
require INFORMATION on how
to operate this product, call
1 - 888 - 936 - ICON (4266)
CAUTION
Read all precautions and instruc-
tions in this manual before using
this equipment. Keep this manual
for future reference.
Serial
Number
Decal
USER'S MANUAL
Visit our website at
www.weslo.com

Advertisement

Table of Contents
loading

Summary of Contents for Weslo pursuit 719

  • Page 1 INFORMATION on how to operate this product, call 1 - 888 - 936 - ICON (4266) CAUTION Read all precautions and instruc- tions in this manual before using Visit our website at this equipment. Keep this manual for future reference. www.weslo.com...
  • Page 2: Table Of Contents

    This is especially important for persons over the age of 35 or persons with pre-existing health problems. Read all instructions before using. ICON assumes no responsibility for personal injury or property damage sustained by or through the use of this product. WESLO is a registered trademark of ICON Health & Fitness, Inc.
  • Page 3: Before You Begin

    Thank you for selecting the innovative WESLO ® Department toll-free at 1-888-936-4266, Monday PURSUIT 719 exercise cycle. The PURSUIT 719 through Friday, 8h00 until 18h30 Eastern Time offers an effective form of low-impact exercise that (excluding holidays). To help us assist you, please...
  • Page 4: Assembly

    ASSEMBLY Place all parts of the exercise cycle in a cleared area and remove the packing materials. Do not dispose of the packing materials until assembly is completed. Assembly requires the included tools and your own adjustable wrench and phillips screwdriver Use the drawings below to identify the small parts used in assembly.
  • Page 5 1. Carefully slide the Handlebar Post (3) onto the Frame (1) while pulling the excess Reed Switch Wire (42) and Resistance Cable (31) up through the Handlebar Post. Attach the Handlebar Post with three M10 x 25mm Button Head Screws (53) and three M10 Split Washers (54).
  • Page 6 5. Attach the Seat Upright (64) to the Seat Frame (2) with four M8 x 54mm Carriage Bolts (11), four M8 Flat Washers (51), and four M8 Nylon Locknuts (55). Note: It may be helpful to tip the exercise cycle on its side to attach the Seat Upright.
  • Page 7 8. Attach the Seat (44) to the Seat Bracket (63) with four M6 x 16mm Screws (46). 9. Attach the Seat Handles (25) to the Seat Bracket (63) with two M10 x 97mm Hex Head Bolts (12) and two M10 Nylon Locknuts (26). 10.
  • Page 8: How To Use The Exercise Cycle

    11. Identify the Left Pedal (39); there is an “L” on the Left Pedal for identification. Using an adjustable wrench, tighten the Left Pedal counterclockwise into the left arm of the Crank (8). Tighten the Right Pedal (not shown) clockwise into the right arm of the Crank.
  • Page 9 DESCRIPTION OF THE CONSOLE on, the entire display will appear for two seconds. The console will then be ready for operation. 2. Select one of the modes: Mode On/Reset Scan mode— Button Button Mode Arrows When the power is turned on, the Upper scan mode will Display...
  • Page 10: Maintenance And Storage

    Make sure that your thumb is positioned as shown, the pedals are not moved and the console but- and that you are applying the proper amount of tons are not pressed for four minutes, the pressure to the pulse sensor. Try the sensor several power will turn off automatically in order to times until you become familiar with it.
  • Page 11: Conditioning Guidelines

    CONDITIONING GUIDELINES Burning Fat WARNING: Before beginning To burn fat effectively, you must exercise at a relatively this or any exercise program, consult your low intensity level for a sustained period of time. During physician. This is especially important for the first few minutes of exercise, your body uses easily individuals over the age of 35 or individuals accessible carbohydrate calories for energy.
  • Page 12 SUGGESTED STRETCHES The correct form for several basic stretches is shown below. Move slowly as you stretch—never bounce. 1. Toe Touch Stretch Stand with your knees bent slightly and slowly bend forward from your hips. Allow your back and shoulders to relax as you reach down toward your toes as far as possible.
  • Page 13: Part List

    PART LIST—Model No. WLCCEX14000 R0601A Key No. Qty. Description Key No. Qty. Description Frame Frame Bushing Seat Frame M4 x 16mm Black Screw Handlebar Post Right Pedal Idler Arm Left Pedal M4 x 12mm Screw Idler Arm Spring Drive Belt Resistance Strap M5 Nut Reed Switch w/Wire...
  • Page 14: Exploded Drawing

    EXPLODED DRAWING—Model No. WLCCEX14000 R0601A 53 54...
  • Page 15: Ordering Replacement Parts

    Friday, 8h00 until 18h30 Eastern Time (excluding holidays). To help us assist you, please be prepared to give the following information: • The MODEL NUMBER of the product (WLCCEX14000) • The NAME of the product (WESLO ® PURSUIT 719 exercise cycle) •...
  • Page 16: Limited Warranty

    LIMITED WARRANTY ICON Health & Fitness, Inc. (ICON), warrants this product to be free from defects in workmanship and material, under normal use and service conditions, for a period of ninety (90) days from the date of pur- chase. This warranty extends only to the original purchaser. ICON's obligation under this warranty is lim- ited to replacing or repairing, at ICON's option, the product through one of its authorized service centers.

This manual is also suitable for:

Wlccex14000

Table of Contents