Table of Contents
Advertisement
OWI User Manual: Model AMP-BT2SIC5 / AMP-BT2SIC6 Speaker Amplifier
Model AMP-BT2SIC5 / AMP-BT2SIC6 Speaker Amplifier
Mechanical "UL rating is dependent upon use of the Backcan and Tile Bridge"
Speaker Diameter
Weight of Amplifier/Speaker Assembly
Height of Amplifier/Speaker Assembly
Backcan "Suitable for use in air
handling spaces"
Tile Bridge "Suitable for use in air
handling spaces"
POWER SUPPLY
PS15VDC35AL5
Input
Output
Wire gauge and length
Electrical, Power Supply
Weight
Size
CAUTION: The Power Supply is not to be used in air handling spaces.
*Note: Maximum power requires the replacement of the 15 volt supply with a 22 volt supply and Energy Star and
UL approvals no longer apply.
Power Supply Wire Gauge and Length - Minimum 18 gauge up to 40 feet maximum length
NON-AMPLIFIED SPEAKER
DESCRIPTION:
IMPEDANCE:
SENSITIVITY (1W/1M):
DISPERSION:
MAX POWER (8 Ohms)
NOMINAL POWER (8 Ohms)
FREQUENCY RESPONSE:
WOOFER SIZE:
WOOFER MATERIAL:
TWEETER SIZE:
TWEETER MATERIAL:
GRILL MATERIAL:
OVERALL DIMENSIONS (Diameter X Height): Inches
CUT OUT SIZE (Diameter): Inches
WEIGHT: lbs.
MOUNTING HARDWARE:
OWI INC.
AMP-BT2SIC5
5.25 inches
2.55 pounds
4 inches
UL Listed Enclosure
UL Listed Support
Truss
SPECIFICATIONS
100 to 240 VAC, 50-60 Hz, 1.4A
Note: Be sure to use the correct polarity on the power input.
15 VDC, 3.5 amperes
Minimum 18 gauge up to 40 feet maximum length
UL Listed, Level 5 (Energy Star)
0.45 pounds
4.7"H x 2"W x 1.2"D
5.25", 2-way, coaxial
8 ohms
85dB
120 degrees
40 watts
20 watts
80Hz ~ 20 kHz
5.25"
Paper, PP coated
0.5"
PEI
Aluminum
Φ7.95*3.15
Φ6.61
2.26
Mounting Clamps
End of Specifications
8
SPECIFICATIONS
AMP-BT2SIC6
6.5 inches
3.15 pounds
4.5 inches
UL Listed Enclosure
UL Listed Support
Truss
SPECIFICATIONS
IC5
6.5", 2-way, coaxial
8 ohms
86dB
120 degrees
50 watts
25 watts
65Hz ~ 20 kHz
6.5"
Paper, PP coated
0.5"
PEI
Aluminum
Φ8.93*3.45
Φ7.68
2.5
Mounting Clamps
www.owi-inc.com
IC6
Advertisement
Table of Contents
