Canon ZR40 Instruction Manual page 87

Notes:
• When you add sound using the built-in microphone make sure not to connect
any cables to the MIC terminal.
• To use your TV to monitor video, connect the S-video terminal (
AV terminal (use only the video plug) to your TV. You can monitor the sound
with headphones only when using the S-video terminal (
Preparations
Turn the camcorder's POWER switch to PLAY (VCR) and load a recorded
cassette.
• Make sure the REC/SAVE tab on the cassette has been slid to REC (closed
position).
Dubbing
Do not connect/disconnect any cables to/from the camcorder when dubbing audio
or preparing to dub audio.
PLAY
(VCR)
VCR SET UP
( 39)
1. Open the menu and select VCR SET UP.
2. Select AUDIO DUB.
3. Select AUDIO IN or MIC. IN and close the menu.
4. Locate the point where you want to start audio dubbing, then press
the PAUSE button.
• You can use the playback buttons on the body of the camcorder or the special
playback functions on the wireless controller in the same way as in playback
mode.
• The camcorder becomes set to playback pause mode.
AUDIO DUB.••AUDIO IN
34) or the
33).
REC
SEARCH
PAUSE
SELECT
ZERO SET
FF
REW PLAY
MEMORY
AUDIO
– / STOP + /
DUB.
AV
× 2
PAUSE SLOW
INSERT
E
87