Canon ZR40 Instruction Manual page 78

Canon instruction manual digital video camcorder zr40
Hide thumbs Also See for ZR40:
Table of Contents

Advertisement

Dubbing
E
1. Find a point on your recorded cassette slightly before the section
you want to copy and set it to playback pause mode.
2. Press the REC PAUSE button on the wireless controller.
• The camcorder enters record pause mode.
3. Start playback on the other digital device while you monitor the
picture.
4. Press the pause button.
• Recording starts.
5. When you get to the point where you want to stop recording, press
the stop button or the pause button.
• Recording stops.
6. Stop playback on the other device.
Notes:
• Blanks between recordings on the playback tape are recorded as anomalous
images on the tape that is being recorded to.
• When dubbing to a cassette with digital video equipment, be sure to set AV \
DV OUT to OFF in the menu.
Copyright signal
Certain pre-recorded software tapes are copyright protected. If you try to play
back such a cassette, "COPYRIGHT PROTECTED PLAYBACK IS
RESTRICTED" appears in the display for a few seconds and then the camcorder
displays a blank blue screen; you cannot view the contents of the cassette.
If you try to record from such a tape via the digital cable "COPYRIGHT
PROTECTED DUBBING RESTRICTED" appears in the display; you cannot
record the contents of the tape.
78

Advertisement

Table of Contents
loading

Table of Contents

Save PDF