Canon ZR40 Instruction Manual page 82

Turning the analog-digital converter on
E
PLAY
(VCR)
( 39)
To turn the analog-digital converter on, open the menu and select
VCR SET UP. Then select AV \ \ DV OUT, set it to ON and close the
menu.
Caution:
• For normal use, set AV \ \ DV OUT to OFF through the menu. If it is set to
ON, you cannot input digital signals through the camcorder's DV terminal.
• If you attempt to perform analog-digital conversion with a cassette inserted to
the camcorder, the converted signals may not be output to the connected digital
video equipment.
• When connecting to a PC equipped with a DV terminal, you may not be able to
transfer converted signals to your PC, depending on the software you are using,
and the specifications of your PC and its settings.
82
VCR SET UP AV DV OUT•••OFF