Panasonic AK-HVF75G Operating Instructions Manual page 30

Menu operations
Item
[ASSIGN]
[FUNCTION DISPLAY]
*1 The setting is cleared when the power is turned off.
*2 Center part of the screen is displayed in enlarged display. A [P-P] mark is displayed at the top left of the screen while in operation.
[VIDEO CONFIG]
Item
[EXIT]
[GAMMA SELECT] —
[FILM GAMMA]
[COLOR TEMP.]
[SHARPNESS MODE]
[SHARPNESS H]
[SHARPNESS V]
[MONO]
30
Selects the function assigned to the <SELECT> dial button when the menu is not displayed.
[FOCUS-IN-RED]: Changes the detection sensitivity of the function to enhance the part that is focused in
the image.
[IN-RED-COLOR]: Switches the display color of the function to enhance the part that is focused in the
image.
[VF DTL]: Adjusts the detail level of the viewfinder.
[MARKER BACK]: Switches the background brightness of outside for the marker set in [MAIN MENU] →
[MARKER] → [ZONE].
[BOX MARKER VF]: Switches the enable/disable of the box marker display on this unit.
[BOX MARKER CAM]: Switches the enable/disable of the box marker display on the camera.
[ZOOM LINK LEVEL]: Switches the detail level of the viewfinder linked with the zoom.
[UNDEF]: Function is not assigned.
f Factory setting: [UNDEF]
[VF DTL], [BOX MARKER CAM], and [ZOOM LINK LEVEL] can be operated only when the camera
(AK-UC4000G/AK-UC4000GS, AK-UC3000G/AK-UC3000GS, AK-HC5000G/AK-HC5000GS) is
connected.
Selects the display setting and the operation setting (one touch, two touches) for the function assigned to
the <F1> to <F3> buttons.
[OFF]: Does not display the function.
[ON1]: Displays the function simultaneously as setting the operation. (One touch)
[ON2]: The function is displayed first, and then the operation is set by pressing the <F1> to <F3> buttons.
(Two touches)
f Factory setting: [ON1]
Returns to the upper level.
Selects the gamma curve.*
[STANDARD]: Standard mode.
[FILM]: Film mode (displays [FILM] at the top left of the screen).
f Factory setting: [STANDARD]
Selects the type of the film gamma mode in accordance with the gamma setting on the camera.*
[FILM REC]: When [FILM REC] is selected.
[OTHER]: When anything other than [FILM REC] is selected.
Brightness
f Factory setting: [FILM REC]
Selects the color temperature.
[USER 0]...[USER 63]: Variable settings 0 to 63 (equivalent to color temperature of 3000 K to 9300 K)
(can be set when the <SELECT> dial button is pressed and the setting value changes to light blue).
[D93]: Equivalent to color temperature of 9300 K
[D65]: Equivalent to color temperature of 6500 K
[D56]: Equivalent to color temperature of 5600 K
f Factory setting: [D65]
Selects the edge width of the contour correction (during peaking).
[HIGH]: Narrow edge
[LOW]: Wide edge
f Factory setting: [HIGH]
Sets the horizontal contour correction.
Adds to the operation of the <PEAKING> knob.
[0]...[30]
f Factory setting: [0]
Sets the vertical contour correction.
Adds to the operation of the <PEAKING> knob.
[0]...[30]
f Factory setting: [0]
Switches between color and monochrome.
[OFF]: Color.
[ON]: Monochrome.
f Factory setting: [OFF]
Setting content
Setting content
Conceptual diagram of gamma curve
Input level
[OTHER]
[FILM REC]
[STANDARD]