Function Display; Mode Check Display - Panasonic AK-HVF75G Operating Instructions Manual

On-screen display

Function display

Function display
1
Press one of the <F1> to <F3> buttons.
Assigned function and its condition are displayed when operating one of the <F1> to <F3> buttons.
f This display disappears after approximately two seconds of inaction.
f Display condition can be changed with [MAIN MENU] → [FUNCTION] → [FUNCTION DISPLAY].

Mode check display

Current setting condition can be displayed.
Perform while the menu is not displayed.
1
Press the <SELECT> dial button.
The setting condition is displayed.
Display disappears when there is approximately two minutes of inaction.
f [BRIGHTNESS]: The value adjusted with the <BRIGHT> knob
f [CONTRAST]: The value adjusted with the <CONTRAST> knob
f [PEAKING]: The value adjusted with the <PEAKING> knob
f [FUNCTION1]: Function assigned to the <F1> button
f [FUNCTION2]: Function assigned to the <F2> button
f [FUNCTION3]: Function assigned to the <F3> button
f [ASSIGN]: Function assigned to the <SELECT> dial button
f [TALLY ASSIGN]: The illumination condition set with [MAIN MENU] → [SYSTEM CONFIG] → [TALLY ASSIGN]
24
<SELECT> dial button
Function button
[ MODE CHECK ]
BRIGHTNESS
CONTRAST
PEAKING
FUNCTION1
FUNCTION2
FUNCTION3
ASSIGN
TALLY ASSIGN
30
50
15
MONO
PIXEL TO PIXEL
FOCUS-IN-RED
UNDEF
OFF