JVC D-ILA DLA-VS3000G Instructions Manual page 50

Connect the motor cable
5
Connect the motor cable (20pin) to lens.
0
CAUTION
Keep the cable away from the motor gear when clamping the motor cable.
0
Tighten the 4 screws using the Phillips head screwdriver to fasten the lens
6
Use the screws that comes with the lens.
0
* The recommended tightening torque for the screws for mounting the lens is 1.47N ・ m (15kgf ・ cm).
Clamp the motor cable
7
50
Motor Cable
Motor Cable
Clamp