Table of Contents
Advertisement
Securing the projector (ceiling mount)
Be sure to ask your dealer to install the unit for you.
0
Installing the unit on your own may cause the unit to
fall resulting in injury.
Take the necessary actions to prevent the main unit
0
from falling off such as during an earthquake.
Regardless of the warranty period, JVC is not liable for
0
any product damage caused by mounting the unit with
non-JVC ceiling fittings or to an environment that is not
suited for ceiling mount.
When using the unit with it suspended from a ceiling,
0
pay attention to the surrounding temperature. When a
heater is in use, the temperature around the ceiling
may be higher than expected.
To attach the unit to the ceiling mount bracket, set the
0
torque between the range of 1.5N m to 2.0N m.
Tightening with torque exceeding the above range
may cause damage to the unit, which may result the
unit to fall.
When reusing the ceiling mount bracket of an old
0
model, consult the specialist to check if there are any
issues with the surrounding space and increase in
weight.
Adjusting the Position
Adjusting the elevation angle of the projector
The height and inclination of the unit (0 to 5 mm) can be
adjusted by turning the feet.
Lift the unit and adjust the four feet.
Extend
Feet
22
Contract
4 Locations
Advertisement
Table of Contents
