Maintaining the Cabinet and Remote Control
Gently wipe off dirt on the cabinet with a soft cloth.
0
If it is extremely dirty, wet a cloth in water, wring dry and use it to wipe off the dirt, followed by wiping again with a dry
0
cloth.
Pay attention to the following as the cabinet may deteriorate in condition or the paint may come off.
0
Do not wipe with thinner or benzine
0
Do not allow prolonged contact with rubber or plastic products
0
Do not spray volatile chemicals such as insecticide
0
Cleaning and Replacing the Filter
Clean the filter regularly. Using a filter without cleaning may reduce the brightness of the image. Dirt that enters the unit
may also appear as shadows on the image.
Loosen the screws at the four corners and remove the cover
1
The screws cannot be removed from the cover. Do not try to remove the screws from the cover by force.
0
Remove the sponge spacer
2
Use a vacuum cleaner to remove dirt from the sponge spacer carefully
3
Restore the sponge spacer to the original position
4
Restore the cover and fasten the screws at the four corners
5
46
Air Filter
(White)
Sponge Spacer (Gray)
2 3 4
1