Shelving And Rack Adjustment; Bulb Replacement; Reversing The Door - Hotpoint SXBHAE 924 WD Instructions For Use Manual

Notes:
• In order to make ice cubes quickly, set the freezer to the lowest temperature, or select the Quick
Freeze Mode.This will make the temperature of the freezer lower.
• Do not over-fill with wate . It may become difficult to remove the ice cubes from ice tray and a
trickle of water into the ice box will make the ice cubes freeze together.
• If the knob is turned before the ice cubes are ready, any remaining water will trickle into the ice
box and cause the ice cubes to freeze together.

Shelving and rack adjustment

Important note: all food and drink should be removed from all shelves and racks before adjusting or
removing them
You can adjust the shelving in the fridge compartment to your required configuration. o remove a
shelf, lift it up slightly so the plastic stabilisers that on either side of the shelf are above the shelf rails
and then pull it towards you.
You can adjust the racks in the fridge and freezer compartments to yourrequired configuration. o
remove a rack hold both sides of the rack, lift it upwards (1) and then pull it towards you (2).

Bulb Replacement

The fridge and freezer lights are energy efficient, long life LEDs. Therefore, they should not need
replacing through out the life of the product.
The bulb is a direct current 12V LED module and in the unlikely event it does fail then it will need to
be replaced by a qualified enginee .

Reversing the Door

The doors cannot be reversed.
refrigerator lamp
20
lamp shade