Frigidaire PLEF489CCG Service Data Sheet page 7

GAS COOKTOP REMOVAL (Dual Fuel Models Only)
1. Shut off gas to range.
2. Disconnect power.
3. Remove gas supply line at the regulator. If necessary, move range out of the cabinet opening.
4. Remove grates, burner covers, knobs and seals.
5. Remove screws securing burner rings and remove rings. Inspect burners, loose screws, electrode,
cleanliness, etc.
6. Remove left and right screws on each side of range securing panel top to body.
Note: Screws are located 1/1/2" from console and 3 inches from back of range.
7. Remove machine screw on manifold side of range (2-3/4" from cooktop) securing manifold to
cooktop.
8. Remove glass top and gasket.
9. To reassemble cooktop, reverse procedure.
EXPLODED VIEW OF SURFACE COOKING SYSTEM
Dual Fuel Models
Electric Models
7