EnGenius EWS357AP v3/ECW220 v2 User Manual page 12

2a. In Windows XP, click Network Connections.
2b. In Windows 7/Windows 8/Windows 10, click View
Network Status and Tasks in the Network and
Internet section, then select Change adapter settings.
3. Right click on Local Area Connection and select Properties.
4. Select Internet Protocol Version 4 (TCP/IPv4) and then
select Properties.
f
5. Select Use the following IP address and enter an IP
address that is different from the Access Point and Subnet
mask, then click OK.
Note: Ensure that the IP address and Subnet mask are
12