Table of Contents
Advertisement
Phone settings
Programming automatic headset connection
The Auto connection menu is displayed if the terminal is set to multi-key mode (See "Pro-
gramming the multi-key function", page 45). However, automatic connection will only take
effect if the headset is activated (normal mode or ContactCenter mode).
Auto connection
Activating the interphone mode
The intercom mode is used to communicate with internal parties, without any action on
your part.
Menu
Settings
Audio
Intercom
Activated
Adjusting the screen contrast
Menu
Settings
Display
70
Two values are proposed:
• Deactivated: line seizure is necessary to start the conversation.
Press
,
• Activated: the call is automatically initiated on the headset.
1 - Press the
Menu
2 - Select
Settings
3 - Select
Audio
and confirm.
4 - Select
Intercom
5 - Select the activation of the interphone mode (Activated)
-> Phone in standby mode, the
to show that the interphone mode is active.
To deactivate the interphone mode, proceed as described above
until step 5, where you select the deactivation of the interphone
mode (Deactivated).
Note:
To activate or deactivate the interphone mode while the
phone is in standby mode, you can also press
1 - Press the
Menu
2 - Select
Settings
3 - Select
Display
and confirm.
, or take the call on the headset.
Fox key.
and confirm.
and confirm.
symbol is displayed in order
Fox key.
and confirm.
.
Advertisement
Table of Contents
