Paradox SP6000 Programming Manual page 70

Keypad Lockout
Use the following section to program keypad lockout settings for your MG/SP control panel. Use worksheet 30 to record your settings.
Worksheet 57: Keypad Lockout
Section
[716] ___/___/___ 000 to 255 minutes
[717] ___/___/___ 000 to 255 attempts before locking
NOTE: For EN 50131, the keypad lockout value must be set between three and ten attempts. The minimum delay to lock must be two minutes.
Dialer Options
Table 64: Description of section [801]
Option Description
1 Report system disarming
2 Report zone restore on closure
3 & 4 Auto-test report transmission
5 Contact ID override
6 Future use
7 Future use
8 Future use
= Default
Timers
Use worksheet 38 to record your settings for sections [820] to [840].
Worksheet 58: Communication Timers
Section Data
[820] ___/___/___ 000 to 255 hours
[830] ___/___/___ 000 to 255 x 2 seconds
[831] ___/___/___ 000 to 032
[832] ___/___/___ 000 to 127 seconds
[833] ___/___/___ 000 to 255 seconds
[836] ___/___/___ 000 to 127 seconds
[837] ___/___/___ 000 to 010
[838] ___/___/___ 000 to 255 seconds
[839] ___/___/___ 000 to 255 minutes
[840] ___/___/___ 000 to 255 days
* Also applicable when using a VDMP3 Plug-in Voice Dialer.
**The maximum value for power failure is 60 minutes.
Special notes for MG5050
The Installer Quick Menu is not available anymore for MG5050 V4.96 or higher.
Section [820] (Fail to comm. clear event timer) is not available anymore for MG5050 V4.9 or higher.
70
Data
Description
Fail to comm. clear event timer (does not apply to SP4000 and SP65)
TLM fail delay (landline only)
Maximum dialing attempts monitoring station (landline and GSM only)
Delay between dialing attempts* (landline and GSM only)
Delay alarm transmission
Personal reporting delay*
Personal reporting message repetition*
Recent closing delay
Power failure report delay**
Auto test report (see
Description
Keypad lockout delay
Keypad lockout counter
OFF
 Always
 Bell cutoff

Disabled

Disabled
)
table 37 on page 42
Magellan & Spectra SP • Programming Guide
Default
015 minutes
005 attempts
ON

After alarm

Zone closure
 Enabled
 Enabled
Default
000 = disabled
016
002
020
000
005
003
000
015
001