Searching And Reviewing While Recording; Record Review - Canon OPTURA200 MC Instruction Manual

Searching and Reviewing While Recording

Record Search
When the camcorder is in record
pause mode, you can use record
search to play the tape forwards or
backwards to locate the point where
you wish to start or resume
recording. This is useful when you
wish to add a new scene to a
previously used cassette. By using
record search, you can ensure a
smooth, noise-free join between the
new scene and the old one.
+
TAPE CAMERA
1. Press and hold the REC SEARCH + or – button on the
camcorder while you check the picture in the display.
• The + button plays the recording forwards and the – button plays it
backwards.
2. Release the button at the point you wish to start recording.
• The camcorder returns to record pause mode.

Record Review

When the camcorder is in record pause mode, you can use record review to
play back the last few seconds of your recording and then return
automatically to record pause mode. You can quickly check if a scene has
been recorded properly and then go on to shoot the next scene, without
producing any noise in the picture.
+
TAPE CAMERA
1. Press and release the c (record review) button while you
check the picture in the display.
• The camcorder rewinds the tape, plays back the last few seconds, and
returns to record pause mode.
Note:
• Noise may appear on the screen when you play the tape backwards.
E
REC SEARCH
39