Canon OPTURA200 MC Instruction Manual page 127

File Operation (FILE OPER.)
PLAY
+
CARD
(VCR)
1. With a still image/movie in the display, press the selector
dial in to open the FILE OPER. menu.
• PROTECT , PRINT MARK
• If you select |RETURN, the menu disappears from the display.
To protect a still image/movie
2. Select PROTECT
• The protect mark appears on the still image/movie.
• Now you are unable to erase this still image/movie.
• Press the selector dial again to cancel it.
• If you select |RETURN, the menu disappears from the display.
• To cancel image protection, select PROTECT
dial in. disappears and now you can erase this still image/movie.
To mark a still image for printing (Print Mark)
2. Select PRINT MARK
selector dial and press the selector dial in.
• The print mark appears on the still image.
• If you select |RETURN, the menu disappears from the display.
• To cancel a print mark, select PRINT MARK
to 0 (Zero) with the selector dial and press the selector dial in.
disappears.
To erase a still image/movie
2. Select IMAGE ERASE and press the selector dial in.
• ERASE THIS IMAGE? NO YES appears in the display.
• If you select |RETURN, the menu disappears from the display.
3. Select YES and press the selector dial in.
• The still image/movie is erased.
• One still image/movie before the erased still image/movie appears.
, and IMAGE ERASE settings appear.
and press the selector dial in.
, set the number of prints with the
and press the selector
, set the number of prints
E
127