Table of Contents
Advertisement
Installation and Connection
Installation and Connection
For DDX719WBTL
10 A fuse
STEERING WHEEL
REMOTE INPUT
¥
Purple with white stripe
Light green
Blue with white stripe
(12 V
350 mA)
P.CONT
Brown
MUTE
\
ANT CONT
C5
A
Antenna cord: Connect to the antenna terminal.
D22
D21
D23
[
π
Connect the antenna cord from the power cord (A) to the antenna
terminal.
USB1 input terminal (1 m)
(USB1) 5 V
1.5 A
To the car's reverse lamp harness when using the optional rear view camera
REVERSE
PRK SW
To the control terminal of the motor antenna or to the power
terminal for the booster amplifier of film-type antenna
Not used.
Connector B: To the car's harness
Connector A: To the car's harness
Connector C: To the car's harness
Connector D: To the car's steering remote harness
• Depending on the type of vehicle, it cannot be
connected
Extension parking cable ( ø )
Pin
Color and Function
A1
Orange/White: Dimmer
A2
Yellow: Battery
A3
Blue: Antenna control
A4
Red: Ignition (ACC)
A
A5
Blue: Antenna control
A6
Black: Ground connection
A7/A8 White with black stripe
A9/A10 Gray with black stripe
B1/B2 Green with black stripe
B
B5/B6 Purple with black stripe
C C5
Blue: Antenna control
D21
White: Input 1
D
D22
Red: Input 2
D23
Black: Ground
*1 When using Antenna Control, connect the ANT CONT lead
(blue) to A5 (blue) on the wiring harness.
*2 For 3-way speaker system connection, see also page 49.
To the car's parking brake detection switch harness
(For best safety, be sure to connect the parking sensor.)
[
]
/ White
: Left speakers /mid range speakers*2 (front)
[
/ Gray
]
: Right speakers /mid range speakers*2 (front)
[
/ Green
]
: Left speakers /tweeter speakers*2 (rear)
[
]
/ Purple
: Right speakers /tweeter speakers*2 (rear)
ENGLISH
51
Advertisement
Table of Contents
