Maintenance; Replacing Filters; Replacing Lights - Westinghouse QR090 Owner's Manual

Maintenance

REPLACING FILTERS

When filters need replacing, exchange with similar. Also replace
filters that are damaged with punctures, bends, or broken
frames .
- Turn off the range hood and disconnect the power .
- Replace with an equivalent filter, then reconnect the
power .
REPLACING LIGHT BULBS
When light bulbs burn out, replace them with a 5W GU10 base
light bulb .
- Turn off the range hood, disconnect it from its power
source, and ensure that the lights are cool .
- Turn the bulb (1) in the direction indicated and pull it out
to remove it .
- Push in the new bulb (2) in the direction indicated until
it locks into the socket . Do not release the bulb until
you are sure the bulb has been securely installed . Then
reconnect the power .
- If new bulbs do not operate, ensure that they are
inserted correctly .
DANGER:
Turn off the power circuit breaker or the power
switch on the junction box before performing maintenance .
Touching circuitry inside the range hood while it is energized
will result in death or serious injury .
WARNING:
will increase the risk of fire.
WARNING:
Do not touch bulbs until they are switched off and cooled .
Touching hot bulbs could cause serious burns .
14
Failure to replace worn out or damaged filters
Light bulbs can become hot when turned on .
1
2