Section 4 - Configuration
Select PPPoE if your ISP provides and requires you to enter a PPPoE username
and password in order to connect to the Internet.
WAN Settings
Connection:
Select PPPoE.
WAN
Username:
Enter the username provided by your ISP.
Password:
Enter the password provided by your ISP.
Confirm Password:
Enter the password provided by your ISP again.
Connection Type:
Select PPPoE LLC or PPPoE VC-Mux.
Service Name:
optional
AC Name:
optional
MTU:
Maximum Transmission Unit - you may need to change the MTU for
optimal performance with your ISP.
Usage
Select Default Route or None.
NAT Enable:
Enable or disable Network Address Translation.
Enable PPPoE
Enable or disable PPPoE Passthrough.
Passthrough
D-Link DSL-3900 User Manual
PPPoE
34