Advertisement
Accessories
1. 2-thread converter
2. Needle pack including two needles, size #14/90. Two
needles, size #14/90, are in the machine on delivery.
3. Screwdriver
4. Tweezers
5. Lint brush
6. Spare lower knife
7 Waste tray
Connecting the foot control and the
power supply
Foot control to use with this machine:
- Type GTC/HKT 72C for 220-240V manufactured by
DANYANG GUOTI MOTOR & APPLIANCE CO., LTD /
ZHEJIANG HUAXING ELECTRIC MOTOR CO., LTD.
- Type GTE/HKT 7 for 100-120V manufactured by DANYANG
GUOTI MOTOR & APPLIANCE CO., LTD /ZHEJIANG
HUAXING ELECTRIC MOTOR CO., LTD.
Before plugging your machine in, make sure the voltage
is the same as indicated on the plate under the machine.
Specifications vary from country to country.
1. Connect the foot control/electric power cord to the socket
on the machine.
2. Plug the power cord plug into the electric outlet.
3. Push the power switch to "-" to turn on the machine.
4. Press the foot control to start sewing. Use the foot control
to adjust the sewing speed. The harder you press, the faster
the machine will sew. To stop the machine from sewing,
remove your foot from the control.
5. Push the power switch to "O" to turn off the machine.
Note: When the front cover is open the safety switch is
activated and prevents the machine from sewing, even if the
foot control is pressed.
Note: Your overlock machine is adjusted to provide the best
stitch result at normal room temperature. Extreme hot and cold
temperatures can affect the sewn result.
POLARIZED PLUG INFORMATION
(FOR U.S.A. & CANADA ONLY)
This appliance has a polarized plug (one blade wider than
the other). To reduce the risk of electric shock, this plug is
intended to fit in a polarized outlet only way. If the plug
does not fit fully in the outlet, reverse the plug. If it still
does not fit, contact a qualified electrician to install the
proper outlet. Do not modify the plug in any way.
6
1
2
5
6
3
4
7
Advertisement
