Canon HV20 Instruction Manual page 42

42 Menu Options Lists
This setting will be unavailable while
the camcorder is connected to an
external device using the HDMI cable.
DV OUTPUT
[ DV LOCKED], [
You can select the video standard to use
when connecting to an external device
using the HDV/DV terminal.
[ HDV/DV]: Switch
automatically between standards to
match the original standard of the
recordings.
[ DV LOCKED]: All video output will
be in DV standard (recordings made in
HDV will be down-converted).
Select the [PLAYBACK STD] and [DV
OUTPUT] settings according to the
specifications you want to use for
Settings for Video Output from the COMPONENT OUT Terminal
Standard of the
Video Output
Recording on the
Signal
High
Definition
(1080i)
Standard
Definition
(480i)
Settings for Video Output from the HDV/DV Terminal
Standard of the
Video Output
Recording on the
Signal
High
Definition
(1080i)
Standard
Definition
(480i)
HDV/DV]
[PLAYBACK STD] Setting
Tape
[ AUTO] or [
HDV
[ AUTO] or [
[ AUTO] or [
DV
[PLAYBACK STD] Setting
Tape
[ AUTO] or [
HDV
[ AUTO] or [
[ AUTO] or [
DV
playback on a high-definition TV. Refer to
the table below.
The DV output cannot be changed
while a DV cable is connected to the
HDV/DV terminal.
NOTES
About the [HDMI OUT] display
[HDMI OUT] appears at the bottom of the
[ PLAY/OUT SETUP2] menu screen in
mode ([
menu in other modes). This is not a selectable
menu option, but rather an information item that
displays the specification of the video output
when the camcorder is connected to an
external device using the HDMI cable. For
further details about the HDMI connection, refer
to 69.
[COMP.OUT] Setting
HDV] [ 1080i/480i]
HDV] [ 480i]
DV] [ 1080i/480i] or [
[DV OUTPUT] Setting
HDV] [
HDV] [ DV LOCKED]
DV] [
[ DV LOCKED]
PLAY/OUT SETUP]
480i]
HDV/DV]
HDV/DV] or