■ Wear full eye protection at all times while IMPORTANT! operating the product. Wear a full face It is essential that you read the instructions mask or fully enclosed goggles. Normal in this manual before assembling, operating, spectacles or sunglasses are not adequate and maintaining the product.
■ Use power tools only with specifically ■ Always be sure of your footing on slopes. designated battery packs. Use of any other Walk, never run. battery packs may create a risk of injury and ■ Keep proper footing and balance. Do not fire.
■ Do not use the product near open windows. MAINTENANCE ■ Use the full blower nozzle extension so that Use only original manufacturer’s replacement the air stream can work close to the ground parts, accessories, and attachments. Failure to and perform effectively. do so can cause possible injury, can contribute ■...
Remove battery pack before starting any work on the product. Wear ear protection. Wear eye protection. Do not expose the product to rain or damp conditions. Guaranteed sound power level Regulatory Compliance Mark (RCM). This product meets applicable regulatory requirements. Waste electrical products...
Page 7
Wear full eye and ear protection, Insert the blower tube into the blower Install the battery pack. Press the substantial footwear, and long trousers tube latch until it clicks into place. variable speed trigger switch to operate at all times while operating the product. the product.
Page 8
p.10 Using the blower Cleaning the blower Storing the blower p.11...
Page 9
USING THE BLOWER WARNING! Do not use the product without the blower tube securely attached. 1. Install the battery pack. 2. Press the variable trigger switch to turn on the product. Let the air stream work close to the ground. Operation...
Page 10
CLEANING THE BLOWER 1. Press the battery latches, and remove the battery pack. 2. Clean the product using a brush. WARNING! Avoid using solvents when cleaning plastic parts. Most plastics are susceptible to damage from various types of commercial solvents and may be damaged by their use.
Page 11
STORING THE BLOWER 1. Press the battery latches, and remove the battery pack. 2. Press the blower tube latch, and remove the blower tube. 3. Store the product in a cool, dry, and well- ventilated place that is inaccessible to children.
Cordless blower measured in accordance with a standardised Model R18XBLW20 test and may be used to compare one tool with Rated voltage 18 V d.c. another. They may be used for a preliminary assessment of exposure.