Table of Contents
Advertisement
Picture View Send Command
The ^PIC Send Command stops either mode of Picture View, or starts Preview Mode. For more information,
please refer to the Modero X Series Programming Guide, available at www.amx.com.
All images must be in JPEG format. PNG and other image formats cannot be viewed
through Picture View.
Configuration
The MXT-700 and MXD-700 are equipped with Settings Pages that allow you to set and configure various
features on the panels. For more information on connecting and configuring the touch panels to a network,
please refer to the Modero X Series Programming Guide, available at www.amx.com.
Bluetooth Support
Both the MXT-700 and the MXD-700 allow the use of Bluetooth keyboard and mouse combinations, using
HID Profile v1.1. Using a keyboard and mouse with the device requires use of the MXA-BT Bluetooth USB
Adapter (FG5968-19).
NFC
Both the MXT-700 and the MXD-700 support Near Field Communications™ (NFC) Technology. NFC
technology facilitates making transactions, exchanging digital content, and connecting electronic devices with
a touch. NFC transmissions are short-range (from a touch to a few centimeters), working with existing
contactless card technologies and containing built-in capabilities to support secure applications. By using NFC
technology, users may receive access to touch panels and touch panel pages through access badges and other
card options.
Common Access Card (CAC) Support In MXT/D-1000
Card Type
15693
14443A Non-Gov't
14443A Gov't
14443B Non-Gov't
14443B Gov't
FeliCa
(1) The UID can be a fixed unique number or a random number dynamically generated by the card.
(2) Requires contact card reader (not accessible via NFC)
The maximum range for the NFC antenna is 0.5" (12.7 mm), but the typical usage range is 0.25" (6.35 mm).
The antenna itself is accessible from the front of the panel, 3.25" (82.55 mm) from the left corner of the panel
and 0.375" (9.53 mm) from the top edge. When using an NFC device with the MXT-700, you should align
your device's antenna with the center of the touch panel's antenna (FIG. 1 and FIG. 4).
To facilitate NFC antenna access, you may want to add an icon to the panel's
page(s), pointing to the location of the antenna on the panel.
For further information, please refer to the video available at the AMX Configure
channel on YouTube: http://www.youtube.com/user/AMXconfigure
MXD/T-700 7" Modero X Series® Touch Panels
Card Unique
Identifier (UID)
8 byte UID
Not Supported
4, 7 or 10 byte UID (1)
Not Supported
4, 7 or 10 byte UID (1)
Not Supported (2)
4 byte UID
Not Supported
4 byte UID
Not Supported (2)
Not Supported
Not Supported
Modero X Series® Touch Panels
Card Data
Personal Identity
Verification (PIV)
Card holder UID
N/A
N/A
Not currently
N/A
Not currently
N/A
11
Advertisement
Table of Contents
