Sony BRC-H800 Operating Instructions Manual page 18

7
Aligning the a hole in the front of the ceiling
bracket (A) to the ◊ hole of the ceiling
bracket (B), push in the camera unit, and
turn the camera with the ceiling bracket (A)
clockwise to temporarily secure the
camera.
Ceiling
◊ mark
Align
a
mark
8
Secure the ceiling brackets (A) and (B)
using supplied three screws (3 M3×8).
Ceiling bracket
(B)
1
Ceiling
bracket (A)
2
18
Ceiling
9-1
Connect the cables to the terminals at the
back of the camera.
Ceiling
Notes
• Make sure no load is applied to the connectors of
the cables.
• For measures that prevent the cord of the AC
adapter (not supplied) from being pulled out, see
"Connecting the Camera" (page 23).
• For measures that prevent the HDMI cable from
being pulled out, proceed to "9-2" after
connecting the HDMI cable. Then, connect all
the other cables.
3
M3×8
(supplied)