Section 1 Introduction; Safety And Precautions; Cautions And Iec Symbols; Table 1. Iec Symbols - Omega PLATINUM Series User Manual

SECTION 1 INTRODUCTION

The MDS8PT Platinum Series Universal Benchtop Digital Meter (Benchtop Meter), is ideal for
laboratory and other application uses requiring portable temperature or process measurement.
It features a universal input configured for use with a thermocouple, RTD, Thermistor or
Voltage/Current signal. The Benchtop Meter is factory configured and calibrated for use out of
the box.
It is important to read and follow all precautions and instructions in this manual and other
referenced manuals, before operating or commissioning this device, as it contains important
information relating to safety and EMC.
1.1
1.2

Safety and Precautions

• Do not exceed the voltage rating.
• Always disconnect the power before changing the signal and power connections.
• Do not operate in flammable or explosive environments.
• Never operate with a power cord that is not properly rated for use with this unit.
• Remove and or disconnect main power cord before attempting any maintenance or
fuse replacement.
• Do not connect and/or operate this unit to a non-grounded or non-polarized outlet or
power source.
There are no user serviceable parts inside unit. Attempting to repair or
service unit may void the warranty.
This product is not designed for medical applications.

Cautions and IEC Symbols

This device is marked with international safety and hazard symbols shown in Table 1
below, in accordance with EN61010 3rd Edition 2012. It is important to read and follow
all precautions and instructions in this manual before operating or commissioning this
device as it contains important information relating to safety and EMC. Failure to follow
all safety precautions may result in injury and/or damage to the meter. Use of this device
in a manner not specified by the manufacturer may impair protection devices and safety
features provided by the unit.
IEC SYMBOLS

Table 1. IEC Symbols

DESCRIPTION
CAUTION, risk of electrical shock
CAUTION, refer to accompanying documents
1