Advertisement
Available languages
Available languages
Installing the Mower Deck
WARNING
Engage the parking brake, disengage PTO, stop
engine, and remove key before attempting to install
the mower deck.
1. Park the tractor, shut off PTO and engine, remove the
key, and apply parking brake. Turn the wheels fully to the
left.
2. Place the attachment lift in the down position (see
Features and Controls). Slide mower deck under right
side of tractor so that mower hitch is aligned with tractor
hitch bracket.
3. Turn the wheels straight ahead. Pull back on the spring-
loaded lever while lifting up on the mower hitch and
install on tractor hitch bracket (see 1-2, Figure 21).
NOTE: When properly installed, the spring-loaded lever
should seat fully underneath the tractor hitch bracket.
en
1
2
Figure 21
4. Connect the attachment lift chain to the hook in tractor
frame (see 1-2, Figure 19). Repeat for the other side.
5. Place the attachment lift in the up position.
6. Pull the idler pulley lever (A, Figure 18) to release belt
tension. Install the belt (B) on the PTO pulley (C).
7. Connect the cutting height wire harness plug to the
tractor harness (see Figure 17).
Lubricate Mower Deck
Lubricate the pulleys at the location shown in Figure 22.
Figure 22
25
Advertisement
