Table of Contents
Advertisement
Microwave oven installation
Built in under requirements
Important: No other methods of building under the microwave are
sanctioned by the manufacturer
•
The rear wall of the housing unit MUST be removed to allow there to
be the correct amount of ventilation
•
The ventilation gaps below the support shelf and below the worktop
must be adhered to.
•
An induction hob MUST NOT be fitted above the microwave.
•
It is not necessary to have a storage drawer fitted underneath the
microwave: this is shown purely as an example in the drawing above.
Warning: the microwave will get hot during operation: care should be
taken not to accidentally come into contact with the outer surface.
All measurements are in millimetres (mm)
17
Advertisement
Table of Contents
