Installing Splashguards - Hussmann BEXDWG Installation & Operation Manual

D P s
3-4
RIP IPIng anD PlashguaRDs

INSTALLING SPLASHGUARDS

The splashguard is shipped inside each
merchandiser. a
merchandisers have been
fTer
leveled and joined, and all drip piping, electri-
cal and refrigeration work has been completed,
1.
install the splashguard. End splashguards are
addressed on the next page.
To Install Splashguards:
1. Check to be sure that all splashguard
brackets are level with the floor.
2. Position top of splashguard with the top
angled in as shown in the illustration. Align
2. & 3.
the slots in the upper edge of the splashguard
with the tabs extending downward behind the
splashguard cover.
3. Engage the slots over the tabs and raise the
splashguard while pushing the bottom in.
4. Align the tabs on the splashguard brackets
with the slots in the bottom edge of the splash-
guard. Engage the tabs in the slots and drop
the splashguard into place.
4.
P/N 3093114_A
U.S. & Canada 1-800-922-1919 • Mexico 1-800-522-1900 • WWW.HUSSMANN.COM